Fuse Replacement (3A Charge Coil And Switch Box Type) - Honda GX610 Owner's Manual

Hide thumbs Also See for GX610:
Table of Contents

Advertisement

TAKING
CARE OF UNEXPECTED
PROBLEMS
FUSE REPLACEMENT
(3A charge coil and switch box type)
The electric starter relay circuit and battery charging circuit are protected by
a25-ampere fuse. If the fuse burns out, the electric starter will not operate. The
engine can be started manually if the fuse burns out, but running the engine
will not charge the battery.
1. Remove the 6 x 12 mm screw from the rear cover of the engine switch box.
2. Remove the fuse cover, and inspect the fuse.
If the fuse is burnt out, remove the fuse cover, then pull out and discard the
burnt-out fuse. Install a new 25-ampere fuse, and reinstall the fuse cover.
Never use a fuse with a rating greater than 25 amperes. Serious damage
to the electrical system or a fire could result.
3. Reinstall the fuse cover. Install the 6 x 12 mm screw and tighten it securely.
\
SWITCH BOX COVER
6X12mm
SPECIAL SCREW
Frequent fuse failure usually indicates a short circuit or an overload in the
electrical system. If the fuse burns out frequently, take the engine to a servicing
Honda dealer for repair.
45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gx620

Table of Contents