Fuse Replacement (Qxe2 Type Only) - Honda GX120 Owner's Manual

TAKING CARE OF UNEXPECTED PROBLEMS

FUSE REPLACEMENT (QXE2 type only)

The electric starter relay circuit and battery charging circuit are
protected by a 5-ampere fuse. If the fuse burns out, the electric starter
will not operate. The engine can be started manually if the fuse burns
out, but running the engine will not charge the battery.
1. Remove the 6
switch box.
2. Remove the fuse cover, and inspect the fuse.
If the fuse is burnt out, remove the fuse cover, then pull out and
discard the burnt-out fuse. Install a new 5-ampere fuse, and reinstall
the fuse cover.
Never use a fuse with a rating greater than 5 amperes. Serious
damage to the electrical system or a fire could result.
3. Reinstall the rear cover. Install the 6
securely.
FUSE
COVER
5 A FUSE
Frequent fuse failure usually indicates a short circuit or an overload in
the electrical system. If the fuse burns out frequently, take the engine
to a servicing Honda dealer for repair.
44
× 12 mm screw from the rear cover of the engine
× 12 mm screw and tighten it
ENGINE SWITCH
REAR COVER
6 × 12 mm
SPECIAL SCREW