Table of Contents
Advertisement
34
Cleaning and Care
Putting the door glass panels back.
1. From above insert the door glass panels at an
angle into the door profile at the bottom edge
of the door one after the other and lower them.
Insert the smaller panel first, then the larger
3
panel.
2. Take hold of the door trim (B) at each side, posi-
tion it on the inside edge of the door and plug
the door trim (B) into the upper edge of the
door
On the open side of the door trim (B) there is a
3
guide bar (C). This must be pushed between the
outer door panel and the guide corner (D).
The clip seal (E) must be snapped in.
Advertisement
Table of Contents
