Zanussi ZCG551GNC User Manual page 20

Problem
The gas ring burns unevenly.
The oven does not heat up.
The oven does not heat up.
The oven does not cook evenly.
The oven lamp does not operate.
The display shows "12.00" and
"LED".
Steam and condensation settle on
the food and in the oven cavity.
The appliance makes noises or
popping sounds.
The flame colour is orange or yel-
low.
If you cannot find a solution to the problem
yourself, contact your dealer or the service cen-
tre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
20
Possible cause
Burner crown is blocked with food
residue.
The oven is not switched on.
The necessary settings are not
set.
The oven lamp is defective.
A power cut.
You left the dish in the oven for
too long.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the oven cavity.
Remedy
Make sure that the injector is not
blocked and the burner crown is
clear of food particles or cleaning
fluids. Dry them with a cloth and
clean stubborn marks away with a
dry nylon brush (for example an
old toothbrush).
Switch on the oven.
Control the settings.
Check that the appliance is cor-
rectly installed and levelled, and
that you use the recommended
temperatures and shelf positions.
Replace the oven lamp.
Reset the clock.
Do not leave the dishes in the
oven for longer than 15-20 mi-
nutes after the cooking process
ends.
When the gas is drawn through
the burner, it can compress as
they heat up. Some metal parts of
the appliance expand and contract
when they heat up or cool down.
The noises are normal.
The flame can look orange or yel-
low (flame disturbance) in some
areas of the burner because of
how the burner is made. This is
normal.
.........................................
.........................................
.........................................
www.zanussi.com