Ide Configuration - ASROCK A780GXE/128M User Manual

This Manual: http://www.manuallib.com/file/2588059
RTC Alarm Power On
Use this item to enable or disable RTC (Real Time Clock) to power on the
system.
ACPI HPET Table
Use this item to enable or disable ACPI HPET Table. The default value is
[Disabled]. Please set this option to [Enabled] if you plan to use this
motherboard to submit Windows
3.4.4 3.4.4

IDE Configuration

IDE Configuration
3.4.4 IDE Configuration 3.4.4 3.4.4 IDE Configuration IDE Configuration
BIOS SETUP UTILITY
Advanced
IDE Configuration
Onboard SATA Controller [Enabled]
SATA Operation Mode [IDE]
IDE1 Master [Hard Disk]
IDE1 Slave [Not Detected]
SATAII_1 [Not Detected]
[Not Detected]
SATAII_2
SATAII_3 [Not Detected]
SATAII_4 [Not Detected]
SATAII_5 [Not Detected]
[Not Detected]
SATAII_6
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
OnBoard SATA Controller
Use this item to enable or disable the "OnBoard SATA Controller" feature.
SATA Operation Mode
Use this item to adjust SATA Operation Mode. The default value of this
option is [IDE]. If you want to operate RAID function on SATA / SATAII HDDs,
please select [RAID]. Configuration options: [AHCI], [RAID] and [IDE].
IDE Device Configuration
You may set the IDE configuration for the device that you specify. We will
use the "IDE1 Master" as the example in the following instruction, which can
be applied to the configurations of "IDE1 Slave" as well.
Vista certification.
® TM
Configure onboard
serial ATA
controller.
Select Screen Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
6 3 6 3 6 3 6 3 6 3