ASROCK A780GXE/128M User Manual page 58

This Manual: http://www.manuallib.com/file/2588059
BIOS SETUP UTILITY
Advanced
CPU Configuration
AM2 Boost [Disabled]
Overclock Mode [Auto]
CPU Frequency (MHz) [200]
PCIE Frequency (MHz) [100]
[Auto]
Spread Spectrum
[Enabled]
Boot Failure Guard
Cool' n' Quiet [Auto]
Secure Virtual Machine
[Enabled]
L3 Cache Allocation
[BSP Only]
Processor Maximum Frequency x15.0 3000 MHz
Processor Maximum Voltage 1.400 V
Multiplier/Voltage Change [Manual]
Processor Frequency [x9.0 1800 MHz]
Processor Voltage [1.350 V]
[Auto]
Memory Clock
[Disabled]
Flexibility Option
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Processor Frequency
This option appears only when you adopt AM2 CPU. This item will show when
"Multiplier/Voltage Change" is set to [Manual]; otherwise, it will be hidden. The
range of the value depends on the CPU you adopt on this motherboard. However,
for system stability, it is not recommended to adjust the value of this item.
Processor Voltage
This option appears only when you adopt AM2 CPU. This item will show when
"Multiplier/Voltage Change" is set to [Manual]; otherwise, it will be hidden. The
range of the value depends on the CPU you adopt on this motherboard. However,
for safety and system stability, it is not recommended to adjust the value of
this item.
Processor Target Frequency
This option appears only when you adopt Phenom CPU. This item will show
when "Multiplier/Voltage Change" is set to [Manual]; otherwise, it will be hidden.
The range of the value depends on the CPU you adopt on this motherboard.
However, for system stability, it is not recommended to adjust the value of this
item.
North Bridge Target Frequency
This option appears only when you adopt Phenom CPU. This item will show
when "Multiplier/Voltage Change" is set to [Manual]; otherwise, it will be hidden.
The range of the value depends on the CPU you adopt on this motherboard.
However, for safety and system stability, it is not recommended to adjust the
value of this item.
CPU Frequency Multiplier
This option appears only when you adopt Phenom CPU. However, for safety
and system stability, it is not recommended to adjust the value of this item.
CPU Frequency Divider
This option appears only when you adopt Phenom CPU. However, for safety
and system stability, it is not recommended to adjust the value of this item.
If AUTO, multiplier and
voltage will be left at the
rated frequency/voltage. If
Manual, multiplier and
voltage will be set based
on User Selection in Setup.
Select Screen Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
5 7 5 7 5 7 5 7 5 7