Step 1, Move Refrigerator Indoors (Zfsb25) - GE Monogram ZFSB25D SS Installation Instructions Manual

STEP 1 MODEL ZFSB25
(GO TO STEP 1A FOR
MODEL ZFSB26)
MOVE REFRIGERATOR INDOORS
IMPORTANT:
the installation location require a 31" min. opening. If
the opening is less than 31", the top cap and doors must
be removed.
NOTE: Skip this step if door removal is not required.
See instructions on next page, "To Move The
Refrigerator Indoors."
NOTE: To prevent damage, leave inside
packaging, door spacer and outside
protective wrap in place until the unit is
moved to the installation location.
D
Wire Harness
Installation Instructions
Door and passageways into
Hinge Screws
C
Water Line Coupler
REMOVE THE DOORS
The top cap must be removed to access hinges. It is best
to remove one door at a time.
A. Remove 2 screws on top and 2 screws at the back of
the top cap. Lift off top cap.
B. Open both doors. Remove the 2 toekick screws and
pull forward to remove.
C. Disconnect the water line coupler by pushing against
the collar on the left side. Disconnect wire harness.
D. Remove 2 screws holding top hinge to the case.
Carefully lift off door.
Follow the same procedure to remove the fresh food
door.
A
5
B
Toekick Screw