Planning Information; Product Dimensions And Clearances; The Installation Space - GE Monogram ZFSB25D SS Installation Instructions Manual

Free-standing side-by-side stainless steel refrigerator
Hide thumbs Also See for Monogram ZFSB25D SS:
Table of Contents

Advertisement

PRODUCT DIMENSIONS
AND CLEARANCES
32"
Depth
72"
36"
34"
Including
Handles
ZFSB26
This Monogram free-standing refrigerator requires
the following clearances for proper air circulation,
plumbing and electrical connections.
Air Circulation Clearances:
• 1/8" on each side
• 1" at the top
• 1" at the back (1-1/2" for ZFSB25)
Installation in a corner:
• Allow 4" clearance on each side to an adjacent wall
for a 90° opening and access to drawers.
ZFSB25 and ZFSB26
14-1/4"
19"
160° Door Swing
• On the freezer side, allow 14-1/4" min. clearance
for removal of ice bin.
• On the fresh food side, allow 19" min. clearance
to wall for removal of drawers.

Planning Information

28"
Depth
72-1/4"
36"
30-1/2"
Including
Handles
ZFSB25
ZFSB25 ZFSB26

THE INSTALLATION SPACE

The opening width must be 36-1/4".
73" min.
Water And Electrical Locations
The opening must be prepared with the electrical
and water supply located as shown.
Additional Specifications
• A 115 volt 60Hz., 15 or 20 amp power supply is
required. An individual properly grounded branch
circuit or circuit breaker is recommended. Install
a properly grounded 3-prong electrical receptacle
recessed into the back wall.
NOTE: GFI (ground fault interrupter) is not
recommended.
• Water line can enter the opening through the
floor or through an adjacent cabinet, as close to
the back wall as possible. The water line should be
1/4" O.D. copper tubing between the cold water
line and water connection location at the rear of the
refrigerator. Installation of an easily accessible shut
off valve in the water line is recommended.
3
36-1/2"
Wall View
Electrical
Area
Water Supply

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents