What To Do If; Remedying Small Malfunctions - Electrolux Swissline GL EWF 1182 User Information

Door and rubber collar
Regularly check whether deposits or foreign bodies are present in the folds
of the rubber collar or on the inside of the glass door.
Clean the glass in the door and the rubber collar regularly.

What to do if...

Remedying small malfunctions

If one of the following fault codes is displayed in the multi-display during op-
eration:
– E10 (Problems with water inlet),
– E20 (Problems with water drainage),
– E40 (door open),
please have a look at the following table.
When the fault is remedied, press the START/PAUSE button.
In the event of other faults (E plus a number or a letter): Switch the appliance
off and on again. Re-set the programme. Press the START/PAUSE button.
If the fault is displayed again, please contact the Customer Care Depart-
ment and inform them of the fault code.
Problem
Washing machine does
not work.
Door cannot be closed.
When a button is pressed,
Err appears in the multi-
display.
E40 appears.
END indicator flashes 4x,
at the same time an
acoustic signal sounds
4x.
Possible cause
Mains plug not plugged in or
fuse not working.
Door not closed properly.
START/PAUSE button was not
pressed for long enough.
Child safety device engaged.
The selected function cannot
be combined with the pro-
gramme set.
Door is not closed properly.
Remedy
Plug in mains plug. Check fuse.
Close door - there should be an
audible click.
Press START/PAUSE button for
longer.
Release child safety device.
Make another selection.
Close door properly. Start pro-
gramme again.
19