To Originate A Call Using Speed Calling; (One-Touch Speed Calling Keys) - NEC DT330 User Manual

5.
F
EATURE
TO ORIGINATE A CALL USING
SPEED CALLING (ONE-TOUCH
SPEED CALLING KEYS)
Press the desired One-Touch Speed Calling key,
Speaker
or press key and One-Touch Speed Call-
ing key.
To Program
(Available only on DT Series with One-Touch Speed
Calling key.)
Press Feature key.
Press desired One-Touch Speed Calling key.
Enter desired telephone number or feature access
code on the keypad.
Display indicates the digits dialed.
Press Feature key again to save the number.
SPEED SET
4:26 PM
To Verify
Feature
Press key.
Press desired One-Touch Speed Calling key.
O
DT330/310
TUE 13 APR 2004
PERATION
Display indicates digits programmed.
Note: To program a hook switch for transfer or feature
activation, press
plays on LCD.)
Note:
To program a pause, press the
any digit other than the first digit. (– displays on
LCD.)
Note:
To program a Voice Call, press
dialing station number. (V displays on LCD.)
Note: One-Touch Speed Calling key for feature access:
One-Touch Speed Calling key may be used as a
feature key by storing the UNIVERGE SV7000
feature access code. The features may be pro-
grammed on a system basis by the Telephony
Server Admin.
Access codes may be stored in conjunction with
telephone numbers. For example, one button can
be programmed by the user to transfer to a certain
extension.
41
Recall key as first digit. (! dis-
Recall
key as
Transfer
key after