To Originate A Call Using Speed Calling (One-Touch Speed Calling Keys) - NEC ITL-12D-1 - DT730 - 12 Button Display IP Phone Quick Start User Manual

TO ORIGINATE A CALL USING
SPEED CALLING (ONE-TOUCH
SPEED CALLING KEYS)
DT730/710 DT330/310
Press the desired One-Touch Speed Calling key,
Speaker
or press key and One-Touch Speed Call-
ing key.
To Program
(Available only on DT Series with One-Touch Speed
Calling key.)
Press key.
Feature
Press desired One-Touch Speed Calling key.
Enter desired telephone number or feature access
code on the keypad.
Display indicates the digits dialed.
Press key again to save the number.
Feature
SPEED SET
1:25 PM
MIC DND
To Verify
Press key.
Feature
Press desired One-Touch Speed Calling key.
Display indicates digits programmed.
Note:
To program a hook switch for transfer or feature
activation, press
plays on LCD.)
TUE 18 MAR 2008
>>>
key as first digit. (! dis-
Recall
Note:
To program a pause, press the
any digit other than the first digit. (– displays on
LCD.)
Note:
To program a Voice Call, press
dialing station number. (V displays on LCD.)
Note:
One-Touch Speed Calling key for feature access:
One-Touch Speed Calling key may be used as a
feature key by storing the feature access code.
The features may be programmed on a system
basis by the Telephony Server Admin.
Access codes may be stored in conjunction with
telephone numbers. For example, one button can
be programmed by the user to transfer to a certain
extension.
32
key as
Recall
key after
Transfer