Table of Contents
Advertisement
Quick Installation
Connect either DVI or Display Port Video source from the monitor to the computer, using
1.
the included DVI-dual link or Display Port cable. Make sure both monitor and computer are
powered OFF.
Note: VGA and HDMI cables may be sourced separately from a cable supplier.
2.
Connect the audio cable from audio output of computer to the audio input of the monitor.
3.
Connect the earphone to the earphone output terminal of the monitor. (Earphone sold
separately).
4.
Connect power cord to a properly grounded AC outlet, and then to the monitor.
5.
Power-ON computer and then POWER-ON the monitor.
6.
Set the timing mode on your computer. Recommended resolution and refresh rate is 2560 x
1440 @ 60Hz.
Note: VGA and HDMI inputs do not support 2560 x 1440 resolution. It is only supported on DVI input, using a DVI
dual link cable, and Display Port input, using Display Port cable.
Figure 1:
Power cable
Audio cable
DVI cable
Display Port cable
6
PC
Earphone
(not supplied)
VGA cable
(not supplied)
HDMI cable
(not supplied)
Advertisement
Table of Contents
