Call Pickup - NEC Univerge DT310 User Manual

1. Press the Call History key (Code 08) or press the
LIST Softkey and CID.
Note: The last addition to the list is displayed.
2. Press the Arrow Down Softkey to scroll through
the list of numbers in memory.
3. Press the DEL Softkey to delete the entry and
scroll to the next entry.
4. The Call History key will remain on as long as
entries remain in memory.
5. To place a call back to a number in the temporary
memory list, with the number to be dialed
displayed, press a Line or the Speaker key.
The outgoing call is placed.
Note:
2-14 THU 4:32PM
12345678
Conf Dir
LIST MENU
Redial CID

CALL PICKUP

Group Call Pickup
To answer a call ringing another telephone in your
Pickup Group:
1. Pick up the handset or press the Speaker key.
ICM Prog
2. Press the Group Call Pickup key (Code 24).
-OR-
Dial 756 or *#.
Note: Access Code *# can pick up any call in the
group, plus any Ring Group calls. Access
Code 756 cannot pick up Ring Group calls.
2-14 THU 4:32PM
Call P/U
Conf
To answer a call ringing a telephone in another Pickup
Group when you do not know the group number:
1. Pick up the handset or press the Speaker key.
2. Press the Group Call Pickup key (Code 25).
-OR-
Dial 769.
To answer a call ringing a telephone in another Pickup
Group when you know the Group Number:
1. Pick up the handset or press the Speaker key.
2. Press the Group Call Pickup key (Code 26 +
group).
-OR-
Dial 768 and the group number (0~9 or 00~64).
34
STA 87654321