NEC Univerge DT310 User Manual page 39

To cancel (erase) a stored Memo Dial number:
1. Press the Speaker key.
2. Press the Memo Dial key (Code 31).
Repeat Redial
To use Repeat Redial (if the outside party you call is
unavailable or busy):
1. Place a trunk call.
Listen for busy tone or Ring-No Answer.
Note:
2. Press the Feature + Redial keys.
-OR-
Press the Repeat Redial key (Code 29).
Note: The Repeat Redial key lights while you wait
for the system to redial.
3. Press the Speaker key to hang up.
The system periodically redials the call.
Note 1:
System programming determines the waiting
Note 2:
time and the number of redial attempts.
4. Lift the handset when the called party answers.
Note: When using trunks with answer supervision,
the Repeat Redial feature automatically
cancels.
Line 001
Repeat Dial
Conf Rpt Save
00:27
33
To cancel Repeat Redial:
1. Press the Feature key.
2. Press the Redial key.
-OR-
Press the Repeat Redial key (Code 29).
2-14 THU 3:15PM
Cancel Repeat Dial
List Dir
Caller ID
Answer
Receive incoming ringing or a transferred outside call:
1. Review the telephone display for the calling party's
name or number.
2. Answer the call accordingly.
Temporary Memory
An unanswered call will cause the Call History key
(Code 08) to flash, indicating a new call has been
placed in the temporary memory. If enabled in
programming, the telephone's display will show:
"Check List".
Line 001
NEC America 2142622000
Conf Dir
ICM Prog
ICM Prog