Table of Contents
Advertisement
Displaying the remaining cooking time
If you select a cooking zone which is in timer mode,
the cooking time still remaining appears in the timer
display window.
Using the timer to measure short
periods of time ("Minute Minder").
1
Important! None of the cooking zones should
be set with the Timer!
1. Touch the "On/Off" sensor field for around two
seconds.
The digital display _ flashes.
2. Touch the TIMER
mer function.
3. Using the
or
sensor fields, set the desired
length of time (for example, 20 minutes).
The Timer begins to run after a few seconds, and in-
dicates the time remaining.
When the set time has elapsed, an audible signal is
sounded.
4. Touch the TIMER
signal.
Ending the timer function prematurely
There are two ways of switching off the timer early:
Switching off the cooking zone and timer
simultaneously
1. Select the desired cooking zone using the cooking
zone buttons.
2. Touch the
and
cooking zone and timer will switch off.
Switching off the timer - leaving the
cooking zone active
1. Select the desired cooking zone using the cooking
zone buttons.
2. Touch the "Timer" button again.
3. Touch the
and
buttons simultaneously:
– Only the timer will switch off.
– The cooking zone will stay on.
sensor field to activate the Ti-
sensor field, to switch off the
buttons simultaneously: The
17
Advertisement
Table of Contents
