Related Manuals for AEG Electrolux EHX 689
Summary of Contents for AEG Electrolux EHX 689
- Page 1 Piani di cottura - Built-in hobs - Ankastre Gazlý Ocak ISTRUZIONI PER L'USO E L'INSTALLAZIONE INSTRUCTION BOOKLET KULLANIM KILAVUZU Mod. EHX 689 - EGG 676 IT-TR 35675-4703...
-
Page 2: Important Safety Information
English Important Safety Information These warnings are provided in the interest of safety. You read them carefully before MUST installing or using the appliance. About Installation, Cleaning and Manteinance • Under no circumstances should you attempt to repair the • It is mandatory that all operations required for the appliance yourself. -
Page 3: Table Of Contents
Contents Guide to Use the instructions The following symbols will be found in the text to For the User guide you throughout the Instructions: Important Safety Information Safety Instructions Instruction for the User Step by step instructions for an operation Cleaning and Maintenance For the Installer Hints and Tips... - Page 4 Using the plate correctly Use of electric plates Saucepans and frying pans (Fig.2) To switch on the plate, turn the relevant knob to the Saucepans and frying pans should not be smaller required position. than the cooking zone, and preferably not more than The plates are regulated by a 7 position switch: 10-15 mm larger than the diameter of the cooking Position 0: off...
-
Page 5: Cleaning And Maintenance
Cleaning and Maintenance Disconnect the appliance from the electrical FO 2265 supply, before carrying out any cleaning or manteinance work. General cleaning Wash the enamelled components with warm soapy water. Never use abrasive cleaners Frequently wash the "caps" and the "crowns" with hot soapy water, carefully taking away any built-up of food. -
Page 6: Technical Data
Setting Length 550 mm. EGG 676: Natural gasG 20 / 20 mbar Width 470 mm. EHX 689: LPG G30/G31 28-30/37 mbar Gas connection G 1/2" Instruction for the Installer Gas connection The following instructions about installation and maintenance must be carried out by qualified... -
Page 7: Electrical Connection
Electrical Connection The appliance is designed to be connected to 230 V RIGID COPPER PIPE OR monophase electricity supply. FLEXIBLE PIPE IN STAINLESS STEEL The connection must be carried out in compliance with the laws and regulations in force. Before the appliance is connected: 1) check that the main fuse and the domestic installation can support the load (see the rating label);... -
Page 8: Adaptation To Different Types Of Gas
Adaptation to different types of gas Injectors replacement • Remove the pan supports. • Remove the burner's caps and crowns. • With a socket spanner 7 unscrew and remove the injectors (Fig. 7), and replace them with the ones required for the type of gas in use (see table 2). •... -
Page 9: Building In
Building In Dimensions are given in millimeters = Auxiliary burner = Semirapid burner = Rapid Burner = Electric plate These hobs can be inserted in a built-in kitchen unit whose depth is between 550 and 600 mm. The hobs dimensions are shown in the relevant diagram. The edge of the cut out must have a minimum distance Fig. -
Page 10: Fig
Possibilities for insertion Kitchen unit with door Kitchen unit with oven Proper arrangements must be taken in designing the The hob recess dimensions must comply the indication forniture unit, in order to avoid any contact with the given in Figs. 13 and 14 and must be provided with bottom of the hob which can be heated when it is brackets to allow a continuous supply of air.