Panasonic VIERA TC-P46S30 Owner's Manual page 8

[]Assembling the pedestal
f_
_>Fix securely with assembly screws ,_A_(Total 4 screws).
m Tighten screws firmly,
/Base
(image: TBL5ZX0032)
IlSet-up
® Carry out work on a horizontal and level surface.
Tighten assembly screws _B_, ( total 4 screws) loosely at first,
then tighten them firmly to fix securely.
Bottom view
Rear side
Arrow
mark
Hole for pedestal
installation
Accessories
Assembly screws
(4 of each)
XYN5+F20FN
size (M5 x 20) (Silver)
THEL088N (for 42")
THEL087N (for 46", 50")
size (M5 x 25) (Black)
Bracket (1)
Base (1)
Pole
8
(image: TC-P50S30)
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall hanging bracket or repacking the TV.
_) Remove the assembly screws _B'_ from the TV.
_2_ Pull out the TV from the pedestal.
_3_ Remove the assembly screws _A) from the pole.
Do not disassemble or modify the pedestal.
® Otherwise the TV may fall over and become damaged, and personal injury may result.
( Caution ")
Do not use any pedestal other than that provided with this TV.
® Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
® If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.
During set-up, make sure that all screws are securely tightened.
® If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
When removing the pedestal, do not remove the pedestal by any methods other than the specified procedure.
® Otherwise the TV and/or pedestal may fall over and become damaged, and personal injury may result.