Panasonic VIERA TC-P46S30 Owner's Manual page 17

Watching TV
Turn power on
(Remote) (TV)
POWER POWER
Of"
INPUT
® Please select correct input --> _ (p. 21)
Select a channel number
or _
• Also available side CH button on the unit.
[For Cable/Satellite box connection]
- Use your connected box s remote contro.
[] To directly enter the digital channel
number
When tuning to a digital channel,
press the button to enter the minor
number in a compound channel
number.
example: CH15-1: __
® Reselect "Cable" or "Antenna" in "ANT in" of "ANT/Cable setup" to switch the signal
reception between cable TV and antenna. (p. 14, 42)
® The channel number and volume level remain the same even after the TV is turned
off.
[] Other Useful Functions
[] Select the Audio mode for watching "iV
SAP Digital mode
Press SAP to select next Audio track (if available) when receiving a digital channel.
Analog mode
Press SAP to select the desired Audio mode.
• Each press of SAP will change the Audio mode. (Stereo/SAP/Mono)
® SAP is not available when watching TV with a Cable or Satellite box connected via HDMI.
® Contact your Cable or Satellite operator for instructions on enabling SAP with their box.
[] Switches the Closed Caption mode On or Off
cc
® Closed Caption is not available when watching TV with a Cable or Satellite box connected via HDMI.
® Contact your Cable or Satellite operator for instructions on enabling CC with their box.
[] Displays and removes information. When watching programming via the Antenna/Cable input,
shows the channel banner.
INFO Channel Clock
Station Signal Picture imer
identifier resolution mode remaining time
Closed caption Rating Level Aspect ratio
®@
E-
-O
17