Panasonic VIERA TC-P46S30 Owner's Manual page 38

Before using a Network camera, you need to register the camera as shown below. You can also set
Default camera or Disconnect/Delete the registered cameras.
(_ Press "Network cameras list" and
display screen
Set Network camera setting
R
_#_ Start camera search.
® Before you start to search for a camera, switch the
camera to registration mode.
® Search condition also depends on "Network settings"
_}'_. Delete camera information.
Fmmmmmmmmmmmmm_
| !
® For this operation, please refer to the operating
manual for the Network camera.
_* Disconnect to camera.
"Disconnected" will be displayed in "Status".
*® Set to default use,
Displayed "(Default)" next to camera name.
(Available only when reconnecting)
_® Connect to Camera. "Connect" will be displayed in
"Status".
_ Select "Software update" _2_ Press OK to start the Software update screen
Follow directions on the screen
® Set "Clock" first. (p. 15)
38