Panasonic VIERA TC-P46S30 Owner's Manual page 48

Channel surf AHIFavoritel Sets the mode to select the channel with the Channel up/down button.
mode Digital only/ Favorite: Only channels registered as FAVORITE. (p. 18)
Analog only
Language English/EspaSol/ Selects the screen menu language.
Fran£:ais
Clock Adjusts the clock. (p. 15)
Input labels
(Display labels
of connected
devices)
Anti Image Pixel orbiter
retention (Wobbling)
(Prevent Image 4:3 side bars
retention) (4:3 mode only)
Scrolling bar
Selects the terminal and label of the external equipment.
Devices connected to external input terminals can be labeled for easier identification during the
input selection. (Input select (p. 21 ))
I erminals: HDMI 1-3/Component/Video
Label: [BLANK] Blu-ray/CABLE/SATELLITE/DVD/DVD REC/DVR/GAME/HOME THTR/
RECEIVER/COMPUTER/MEDIA CTR/MEDIA EXT/VCR/CAM ERA/MONITOR/AUX/
OTHER/Not used
• You can also enter the label name directly. (Entering characters (p. 19))
Enable/Disable Enable: Shifts the display image automatically•
OfflDarklMidl Changes the brightness of the side bar
Bright The recommended setting is "Bright" to prevent the panel
"Image retention". (p. 53)
Press "OK" to start the horizontal "Scrolling" on the screen• [Scrolling bar]
• Press any key except the POWER key to return to previous
screen.
• You will return to the previous screen if no key operation has
been performed for 15 minutes.
ECO/energy No signal for 10
saving minutes
(Stay on/Power
TV off)
No activity for 3
hours
(Stay on/Power
TV off)
Keyboard type
Advanced setup Auto power on
(No/Yes)
Image viewer
auto play
First time setup
About
Reset to defaults
To conserve energy, the TV automatically turns off when NO SIGNAL and NO
OPERATION continue for more than 10 minutes.
• Not in use when "Auto power on" is set to "Yes", or "On/Off Timer" is set.
• "No signal for 10 minutes was activated" will be displayed for about 10 seconds
when the TV is turned on for the first time after the power was turned off by "No
signal for 10 minutes"•
• The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining
minutes prior to the shut-off.
To conserve energy, the TV automatically turns off when no operation of remote and
side panel key continues for more than 3 hours.
• Not in use when "Auto power on" is set to "Yes", or "On/Off Timer" is set.
• "No activity for 3 hours was activated" will be displayed for about 10 seconds when
the TV is turned on for the first time after the power was turned off by "No activity
for 3 hours".
• The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining
minutes prior to the shut-off.
Select keyboard type. Operate USB keyboard (p. 19)
(U.SJCanadian French/Canadian Multilingual Standard/Spanish (Latin
America)/Spanish (Spain))
Turns TV On automatically when the cable box or connected device is turned On.
TV AC cord must be plugged into this device. TV turns on every time the power is restored.
81ideshowtPhotest Sets the media contents or playback type to play back SD
VideoslMusi¢l cards automatically.
Set latertOff Set later: "Image viewer settings" menu will be displayed repeatedly.
"Using Media player" (p. 22)
Restarts the first time setup from "Language" setting. (p. 13)
Displays TV version and software license.
Performing Reset will clear all settings made with Setup, such as channel settings.
• Password setting/entering (p. 19)
48