Abit BH6 User Manual page 27

Introduction of BIOS
Attention: After setting up the parameters and you leave the BIOS SETUP,
and you have verified that the system can be booted, do not press
the Reset button or turn off the power supply. Otherwise the BIOS
will not read correctly, the parameters will fail and you must enter
CPU SOFT MENU
again.
CPU Power Supply:
This option allows you to switch between CPU Default and user define voltage.
" " " " CPU Default: System will detect CPU type and select proper voltage
automatically. When it is enabled ,the option "Core Voltage"
will show the current voltage setting that is defined by the
CPU and this will not be changeable. We recommend
this CPU default setting and not changing it unless current
CPU type and voltage setting can not be detected or not
correct.
" " " " User define: This option lets the user select the voltage manually. You can
change values of the "Core Voltage" option lists by using the
Page Up and Page Down keys.
Warning: The wrong settings of the multiplier and external clock in certain
circumstances may cause CPU damage. Setting the working
frequency higher than the PCI chipset or processor specs, may cause
abnormal memory module functioning; system hangs; hard disk
drive data lose; VGA card abnormal functioning, or abnormal
functioning in other add-on cards. Using non-specification settings
for your CPU is not the intention of this explanation. These should
be used for engineering testing, not for normal applications.
If you use non-specification settings for normal operation, your system may
not be stable, and may effect system reliability. Also, we do not guarantee the
stability and compatibility for settings that are not within specification, and any
damage of any elements on the motherboard or peripherals, is not our
responsibility.
™
II again to set up the parameters all over
3-7
using