Installing System Memory - Abit BH6 User Manual

Installing the Motherboar

(5)    Installing System Memory

The motherboard provides three 168-pin DIMM sites for memory expansion..
The DIMM socket supports 1Mx64(8MB), 2Mx64(16MB), 4Mx64(32MB),
8Mx64(64MB), 16Mx64(128MB), and 32Mx64(256MB) or double sided
DIMM modules. Minimum memory size is 8MB and maximum memory size is
768MB SDRAM.
There are three Memory module sockets on the system board.(Total six banks)
In order to create a memory array, certain rules must be followed. The following
set of rules allows for optimum configurations.
!
The memory array is 64 or 72 bits wide. (Without parity or with parity)
!
Those modules can be populated in any order.
!
Support single and double density DIMMS.
The following is the valid memory configuration:
Bank
Bank 0, 1
(DIMM1)
Bank 2, 3
(DIMM2)
Bank 4, 5
(DIMM3)
Total System Memory
Memory Module
8MB, 16MB, 32MB,
64MB, 128MB, 256MB
8MB, 16MB, 32MB,
64MB, 128MB, 256MB
8MB, 16MB, 32MB,
64MB, 128MB, 256MB
2-11
Total Memory
8MB ~ 256MB
8MB ~ 256MB
8MB ~ 256MB
8MB ~ 768MB