Code Table - TELUS Satellite TV HD PVR User Manual

Using your TELUS Satellite TV service
Setting up your remote control using device code tables
INSTRUCTIONS
1 Turn the device on .
2 Find the brand name of the device in the tables
starting on page 71 .
3 Press and hold the mode button until all the other
mode buttons light up, and then let go of the
button . The mode button should flash .
4
For AUX mode only . Press
for a second VCR or DVD player , or
A/V receiver .
5 Enter one of the 3-digit device codes from the table
using the number buttons on your remote .
6
If you want to program limited mode, press
If not, skip to step 7 .
7
Press .
8 Press to turn off the device . If the device does
not turn off, go to step 10 .
9 Turn the device back on and try some other
buttons to make sure they work . If the code works
for other buttons, stop here .
10 If the code doesn't work, repeat steps 3 through 9
with another device code from the tables .
11 If you can't find a code that works try Setting up
your remote control using device codes scan on
page 28 .
ADDITIONAL INFORMATION
Use the device's front panel buttons or the remote
control .
If the brand isn't listed, see Setting up your remote
control using device codes scan on page 28 .
For example, hold
mode buttons light . When you let go,
This step is for programming which kind of device
for a second TV ,
should be programmed in AUX mode . If you're not
for an
programming in AUX mode, skip to step 5 .
The 3-digit device code should be for the brand
name of your device that you found in step 2 .
See Limited mode on page 26 for more
.
information .
If you entered the code correctly, the mode button
should flash 3 times .
If the code works, the device should turn off .
Sometimes
If in limited mode, try
Try every code listed for your brand until one works
for your device .
for a TV until all of the other
will flash .
works when other buttons don't .
or .
27