Table of Contents
Advertisement
2
Quick Setup
If your DVD Receiver is correctly connected (see the chapter on cable connections), a menu will appear when you turn
on the DVD Receiver. The menu installs the most important settings for your TV set and language.
Note: If this menu does not appear when you start the DVD Receiver, recheck the cable connections.
Note: Try connecting your TV set using the Composite Video cables. Composite Video always produces a picture.
Select the video connection your DVD receiver is
plugged with. Your options are SCART, S-Video
or Component video. Composite video is always
available, but the quality level is not as good as
the other connections.
Language
Select the language that will be used whenever
you open the DVR 50's built-in menus. Use the
arrow buttons on the remote control to move
the rectangular frame to the language you wish
to select and press ENTER.
Video
9
Hide quick links:
Advertisement
Table of Contents
