Using The Setup Navigator - Pioneer XV-HTD1 Operating Instructions Manual

Before playing any discs, we strongly recommend using
the Setup Navigator. This makes all the basic DVD
system settings for you.
Also turn on your TV and make sure that it is set to the
correct video input.
• If a disc that's already loaded starts to play, press 7
to stop it.
The Setup Navigator on-screen display (OSD) appears:
Video Language General
Setup Navigator
Setup Navigator
Start
Auto Start Off
Setup using the Setup Navigator
Move Select
ENTER
Navigate all of the following OSDs using these controls:
5, ∞ – cursor up/down
– select the highlighted menu option
2 – go back to the previous question
The control possibilities for the current OSD are shown
at the bottom of each screen.
En
DVD SETUP
5
2 3
ENTER
∞
7
Exit
SETUP
• If you decide not to use the Setup Navigator, select
here instead.
Video Language General
Setup Navigator
Language English
OSD Language français
Español
Select the On Screen Language
Move Select Exit
ENTER SETUP
• The language options shown in the on-screen
display illustrations on the following pages may not
correspond to those available in your country or region.
Video Language General
Setup Navigator
TV Connection
TV Type
Widescreen (16:9)
Standard (4:3)
Widescreen TV
16:9 aspect ratio
Move Select Exit
ENTER SETUP
• See Aspect ratio in the glossary on page 46 if you're
unsure of the difference between widescreen and
standard TVs.
Video Language General
Setup Navigator
Save Changes
Exit Setup Navigator
Delete Changes
Start Again
Changes are saved
Move Select Exit
ENTER SETUP
Congratulations, set up is complete!
If you want to use the Setup Navigator again at any
time, it is available from the
each individual setting can be changed using the
appropriate menu option—chapter 11 explains all
menu options in detail.
menu. Also,