Using The Wake Up Timer - Pioneer XV-HTD1 Operating Instructions Manual

You can use the timer as an alarm clock to wake up to
the sound of a disc loaded or the radio. If you have an
external component operated by a separate timer, you
can also set it as the source function.
Once the timer is active, it will switch the system on
everyday at the set time.
Unlike an ordinary alarm clock, you need to set a
system switch off time, as well as a switch on time.
For a disc, press
; for an external component, press
If you selected an external component, make the
appropriate timer settings for it.
2 3
2 3
The display shows a switch on time with the hour
blinking.
Use 5 and ∞ to set the hour then press
minute in the same way, pressing
• If you make a mistake, press
start again from step 3.
En
; for the radio press
.
. Set the
to finish.
and
Set in the same way as the switch on time, pressing
to finish.
• If you make a mistake, press
start again from step 3.
The display should indicate that you have set the wake
up timer, then show the on time, the off time, the
function (DVD, etc.), and the volume. The display
shows after all the settings.
• There is no direct way to edit the timer settings. If
you see that some timer setting is not what you'd
intended, you'll need to start the process again from the
top.
The timer will not work if the system is left on!
The timer indicator ( ) lights when the timer is on.
To activate the wake up timer, set the timer to
deactivate it, set the timer to
2 3
2 3
The timer indicator ( ) lights when the timer is on.
and
. To
.