Scanning Using The Scan Key; Scan Key Settings - Brother DCP-1510 User Manual

Scanning using the SCAN key

NOTE
If you want to use this function, install the MFL-Pro Suite and connect the machine to your PC
with a USB cable.
a
Load your document. (See How to load documents on page 33.)
b
Press (SCAN).
c
Press a or b to choose Scan to PC.
Press OK.
d
Press a or b to choose a scan type (File, E-mail or Image.)
Press OK.
e
Press a or b to choose Start Scan.
Press OK.
f
Press Start.
The machine starts the scanning process.

SCAN key settings

You can change your machine's SCAN key settings using ControlCenter4.
a
Do one of the following:
®
(Windows XP, Windows Vista
Open ControlCenter4 by clicking
(where XXX-XXXX is your model name)/ControlCenter4. The ControlCenter4 application
will open.
®
(Windows 8)
Click (Brother Utilities), and then click the drop-down list and select your model
name (if not already selected). Click SCAN in the left navigation bar, and then click
ControlCenter4.
The ControlCenter4 application will open.
b
Click the Device Settings tab.
® ®
and Windows 7)
(Start)/All Programs/Brother/XXX-XXXX
How to scan to a computer
10
10
10
57