Brother DCP-1510 User Manual page 22

Chapter 1
2.Fax (continued)
Level 2 Level 3
1.Setup 3.Fax Detect
Receive
(In FAX mode
only)
(Continued)
4.Auto
Reduction
5.Memory
Receive
The factory settings are shown in Bold with an asterisk.
14
Descriptions 1 Options
Receives fax
On*
messages without
pressing Start. When
Fax Detect is On, you
can receive fax
Semi (MFC-1815)
messages without
pressing Start.
Off
The machine
On*
calculates the
reduction ratio by
using the page size of
the fax and your
Paper Size setting
(Menu, 1, 2, 2).
Off
Automatically stores
On*
any incoming faxes in
its memory if it runs
out of paper.
The machine will
carry on receiving the
current fax, with the
remaining pages
being stored in
memory, if enough
memory is available.
Descriptions 2 Page
The machine can 38
receive a fax
automatically, even if
you answer the call.
The machine will only
receive a fax call
automatically if you
answered it using the
machine's handset.
If you are at the
machine and answer
a fax call first by lifting
the handset of an
external telephone
(MFC-1810 and
MFC-1811 only) or
the machine
(MFC-1815 only),
press Start.
If you choose On, the
machine
automatically
reduces each page of
an incoming fax to fit
on one page of A4,
Letter, Legal or Folio
size paper.
Further incoming
faxes will also be
stored into memory
until the memory is
full. When the
memory is full the
machine will stop
automatically
answering calls. To
print the faxes, put
fresh paper in the tray
and press Start.