Controlling The Tv - LG ShowView LV4787 Owner's Manual

Controlling the TV

You can control the sound level, input source, and power switch of your LG TV with the
supplied remote control.
You can control your TV using the buttons below
By pressing You can
TV POWER Turns the TV on or off..
TV PR +/– Scans up or down through memorized channels.
TV VOL +/– Adjust the volume of the TV.
TV AV Switch the TV's input source between the TV and other input
sources
Controlling other TVs with the remote control
You can control the sound level, input source, and power switch of non-LG TVs as
well. If your TV is listed in the table below, set the appropriate manufacturer code.
1
While holding down TV POWER button, press the number buttons to select the
manufacturer code for your TV (see the table below).
2
Release TV POWER button.
Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until you find
the one that works with your TV.
Manufacturer Code Number
LG / GoldStar 1 (Default), 2
Zenith 1, 3, 4
Samsung 6, 7
Sony 8, 9
Hitachi 4
NOTES:
Depending on your TV, some or all buttons may not function on the TV, even after
O
entering the correct manufacturer code.
If you enter a new code number, the code number previously entered will be erased.
O
When you replace the batteries of the remote, the code number you have set may
O
be reset to the default setting. Set the appropriate code number again.
37