Using The Video Recorder To Record; To Record - LG ShowView LV4787 Owner's Manual

Using the video recorder to record

Introduction to the recording features
There are a variety of recording modes available to you on this video recorder.
1 You may record immediately (a programme you may be watching).
2
You may record immediately for a set period of time of up to 9 hours. This is
called Instant Timer Recording (ITR).
3
You may record at a later time (up to 1 month from the present) using the built-in
timer. Up to 7 of these automatic recordings may be set at the same time -provided,
of course, that there is sufficient time on the video cassette.
There are two ways in which you can programme the video recorder for automatic
recording.
1 You can use the ShowView feature, which is built into this video recorder
(see p 25 to 26) (LV4787/LV4767/LV4747).
2 You may set the times manually, using either the on screen display (OSD)
(see p 27 to 28).
Note - Ensure that the safety tab has not been removed from the video cassette on
which you wish to record.

To record

1 Switch on the TV set and video recorder.
2
Insert a video cassette with the window side up, and the arrow pointing away
from you, or if a video cassette is already loaded switch on the video recorder by
pressing the "POWER" button.
3 Select the programme channel with the number buttons or cursor PR + and -
buttons.
Note:
If you want to record from either of the EURO SCART sockets on the back of the
video recorder, or from the AUDIO/VIDEO input terminals on the front, press the
"AV" button to the correct position, as shown by the display on the TV screen.
"SC01": for Hi-Fi audio recording from AUDIO IN (L/R) terminals of your audio
system.
"AV1": for recording from EURO AV1 scart socket.
"AV2": for recording from DECODER/EURO AV2 scart socket.
"AV3": for recording from VIDEO IN and AUDIO IN (L/R) terminals (see p 6).
4 Select LP with the "LP" button, if you want to record in Long Play mode.
5 Press the "REC/ITR" button to start recording. "RECORD" will appear for a few
seconds on the TV screen.
6 If you want to avoid recording unwanted scenes press the "P/STILL" button.
"RECP" will appear for a few seconds on the TV screen. To continue recording
press the "P/STILL" button again.
7
Press the "STOP" button to stop recording. "STOP" will appear for a few seconds
on the TV screen.
23