Pedal Assign - Kawai Concert Performer CP119 Quick Start Manual

Page
92

6) Pedal Assign

The Soft and Sostenuto pedals on the Concert Performer function as much more than just traditional
piano pedals. These pedals can be assigned to control various other functions on the CP piano.
Damper Pedal (Right)
Sustain
Damper Hold
Pedal assignment options for Soft Pedal (Left) and Sostenuto Pedal (Center)
Soft
Sostenuto
Start/Stop
Harmony on/off
Registration
Style Variation
Intro/Ending
Fill In
Break
Drums Only
Sync/Fade Out
Glide
Modulation
Rotary Fast/Slow Controls the speed of rotary speaker effect. This function will be automatically assigned to the Soft
Left Hand Hold
Panel Lock
Easy Loop
7
Can be activated or deactivated separately for each Part.
The Damper Hold On/Off allows you to determine if the sound such as organ or strings should be held
(on) or gradually decayed (off) when the damper pedal is depressed.
Softens the sound and reduces its volume.
Sustains only notes that were held when pedal was depressed.
Controls start/stop for Styles and Songs.
Turns the instrument Harmony function on/off.
Switches from one Registration to another. You may choose the order, 1 to 8 or 8 to 1.
Switches from one Style Variation to another. You may choose the order, 1 to 4 or 4 to 1.
Plays the Intro or Ending.
Plays the Fill-in currently selected.
Interrupts the whole Style.
Interrupts the Style except Drum part.
Controls the SYNC/FADE OUT button.
Bends the pitch up and down as programmed by you.
Applies programmable vibrato to the sound.
Pedal (Left) when a sound that has the rotary effect turned on is selected as the Priority Part.
Holds the notes played in the LEFT/SPLIT Part as long as the pedal is depressed.
Locks all buttons on the panel to prevent them from being tampered with or pressed accidentally while
you are playing. Press the assigned pedal once to lock the panel buttons. Press the assigned pedal
again to unlock the panel buttons.
Repeats the selected bars again and again. 1st press: assign the loop top, 2nd press: assign the loop
end, 3rd press: cancel the loop.