Adding Chorus - Kawai Concert Performer CP119 Quick Start Manual

Step 7
Press the EXIT button to leave the Reverb Settings menu.
Step 8
If you wish to turn the reverb effect off, press the REVERB button again.
Type of Reverb
Hall 1, Hall 2 Simulates the ambiance of a concert hall or theater.
Stage 1, Stage 2 Simulates the ambiance of a small hall or live house.
Room 1, Room 2 Simulates the ambiance of a living room or small rehearsal room.
Plate Simulates the sound of a metallic plate reverb.
The LED Indicator on the REVERB button will be lit whenever Reverb is turned on for the any Part except ACC (regardless
of each part's Effect Priority). See "Effect Priority Guidelines" later in this chapter for an explanation of Effect Priority.

Adding Chorus

Step 1
Press the EFFECTS button.
The EFFECT/CHORUS select screen will be displayed.
Step 2
Touch the CHORUS EDIT button.
The CHORUS settings screen will be displayed.
Step 3
Use the dial to select the Chorus type.
EFFECT EDIT : Show the Effect Edit screen.
CHORUS EDIT : Show the Chorus Edit screen.
PART BUTTONS : Selects the part to adjust.
Page
25
3