Table of Contents
Advertisement
The effect is most useful on the Piano sounds, but is available for all of
the Internal Sounds.
Normal: Produces the normal tone of an acoustic piano throughout the entire
dynamic range.
Mellow:
Produces a mellower tone throughout the entire dynamic range.
Dynami: This setting is not possible with an acoustic piano.
Softly played
notes will have the tone of a mellow voicing and notes played harder
will have the tone of a bright voicing. This setting produces a dramatic
change from mellow to bright throughout the entire dynamic range.
Bright:
Produces a brighter tone throughout the entire dynamic range.
Tx/Rx Ch (Transmit/Receive Channel)
[Value Range: 1 - 16]
This parameter selects the MIDI channel that will be used for transmitting
and receiving MIDI data in SINGLE mode.
This MIDI channel must be
matched to an external MIDI device.
(see p.13)
Volume
[Available types: Int/Ext/Both]
This parameter selects the assignment of Fader 1. This fader can be
assigned to control the volume (CC#7) of internal sounds only, external
MIDI devices only, or both simultaneously.
Int:
Assigns Fader 1 to Internal sounds only.
Ext:
Assigns Fader 1 to external MIDI devices only.
Both:
Assigns Fader 1 to both internal sounds and external MIDI devices.
FootSW (Foot Switch)
[Available types: Int/Ext/Both]
This parameter selects the assignment of the FootSwitch. The FootSwitch
can be assigned to control internal sounds only, external MIDI devices
only, or both simultaneously.
Int:
Assigns the FootSwitch to Internal sounds only.
Ext:
Assigns the FootSwitch to External MIDI devices only.
Both:
Assigns the FootSwitch
to both internal sounds and external MIDI
devices.
ExpPdl (Expression Pedal)
[Available types: Int/Ext/Both]
This parameter selects the assignment of the Expression Pedal.
The
Expression Pedal can be assigned to control internal sounds only,
external MIDI devices only, or both simultaneously.
Int:
Assigns the Expression Pedal to Internal sounds only.
Ext:
Assigns the Expression Pedal to External MIDI devices only.
Both:
Assigns the Expression Pedal to both internal sounds and external
MIDI devices.
15
Advertisement
Chapters
Table of Contents
