Lower Pedal On/Off - Kawai ES6 Owner's Manual

Page
58

8) LOWER PEDAL ON/OFF

When using SPLIT mode, this function determines whether or not pressing the damper pedal will also sustain
the Lower section sounds.
… Step 1
Press and hold the TOUCH and TRANSPOSE buttons, then press the BASS button twice.
The LED indicators for the TOUCH, TRANSPOSE, and BASS buttons will start to fl ash, indicating that the Lower
Pedal On/Off function has been selected.
The name of the function 'LPd' (Lower Pedal) and the current settings will be shown in the LED display.
… Step 2
Press the T or S VALUE/BALANCE buttons to select the desired Lower Pedal setting.
When set to 'On', pressing the damper pedal will sustain the Lower section sounds.
When set to 'Off', pressing the damper pedal will not sustain the Lower section sounds.
Note that regardless of the 'On' or 'Off' setting, pressing the damper pedal will always sustain the Upper section
sounds.
… Step 3
Press one of the TOUCH, TRANSPOSE, SOUND SELECTION, EFFECTS, or REVERB buttons to exit
Lower Pedal On/Off setting mode.
The LED indicators for the TOUCH, TRANSPOSE, and BASS buttons will stop fl ashing.
6
„ The Damper Effect (page 53) will be used regardless of the Lower Pedal On/Off setting.
„ Any changes made to the Lower Pedal On/Off setting will remain until the power is turned off.
„ When the power is turned off, the Lower Pedal On/Off setting will return to the default value of 'Off', however it is
Press the BASS button twice
possible to use the Memory Backup function to store the preferred Lower Pedal On/Off setting. Please refer to the
instructions on page 62 for more information.
2
Press and hold both buttons
LOWER PEDAL
Off On
1