Lower Octave Shift - Kawai ES6 Owner's Manual

7) LOWER OCTAVE SHIFT

When using SPLIT mode, this function allows the Lower section to be raised by one, two, or three octaves.
… Step 1
Press and hold the TOUCH and TRANSPOSE buttons, then press the BASS button.
The LED indicators for the TOUCH, TRANSPOSE, and BASS buttons will start to fl ash, indicating that the Lower
Octave Shift function has been selected.
The name of the function 'Lot' (Lower Octave) and the current settings will be shown in the LED display.
… Step 2
Press the T or S VALUE/BALANCE buttons to increase or decrease the Lower Octave Shift to the
desired value.
The Lower Octave Shift value can be set within the range of 0 to 3.
… Step 3
Press one of the TOUCH, TRANSPOSE, SOUND SELECTION, EFFECTS, or REVERB buttons to exit
Lower Octave Shift setting mode.
The LED indicators for the TOUCH, TRANSPOSE, and BASS buttons will stop fl ashing.
„ Any changes made to the Lower Octave Shift setting will remain until the power is turned off.
„ When the power is turned off, the Lower Octave Shift setting will return to the default value of '0', however it is possible
to use the Memory Backup function to store the preferred Lower Octave Shift value. Please refer to the instructions on
page 62 for more information.
2
Press the BASS button
LOWER OCTAVE SHIFT
1
Press and hold both buttons
Page
57
6