Tuning - Kawai ES6 Owner's Manual

2) TUNING

The TUNING function allows the pitch of the ES6 digital piano to be fi nely adjusted, and may prove useful when
playing with other instruments.
… Step 1
Press and hold the TOUCH and TRANSPOSE buttons, then press the PIANO2 button.
2
Press the PIANO2 button
The LED indicators for the TOUCH, TRANSPOSE, and PIANO2 buttons will start to fl ash, indicating that the
Tuning function has been selected.
The name of the function 'tun' (Tuning) and a number representing the pitch for 'A3' in Hz (Hertz) will be shown
in the LED display.
A test tuning tone will also be played.
… Step 2
Press the T or S VALUE/BALANCE buttons to increase or decrease Tuning to the desired pitch.
The tuning pitch can be set within the range from 427.0 to 453.0 Hz (displayed as '27.0' and '53.0').
The tuning pitch will increase or decrease in 0.5 Hz increments each time one of the VALUE/BALANCE buttons
is pressed.
… Step 3
Press one of the TOUCH, TRANSPOSE, SOUND SELECTION, EFFECTS, or REVERB buttons to exit
Tuning setting mode.
The LED indicators for the TOUCH, TRANSPOSE, and PIANO2 buttons will stop fl ashing.
While adjusting the tuning settings, the currently select sound will be heard when pressing a key on the
keyboard.
To use a different sound while adjusting the tuning settings, fi rst exit the tuning mode, select the desired sound,
then repeat Step 1 and Step 2.
„ Any changes made to the Tuning setting will remain until the power is turned off.
„ When the power is turned off, the Tuning setting will return to the default value of '44.0', however it is possible to use
the Memory Backup function to store the preferred Tuning value. Please refer to the instructions on page 62 for more
information.
Press and hold both buttons
TUNING
= 427.0 ~ 453.0
1
Page
51
6