Settings; "Tone/Pulse" Switch; Setting The Date And The Time; Setting Area Code - Siemens A48 User Manual

A48 User manual

Settings

"Tone/pulse" switch

On the rare of the base is a "Tone/Pulse" switch for tone or pulse mode
selection.

Setting the date and the time

Press the Redial/Pause/Time key for 2 seconds
Press or to adjust the Month
Press Redial/Pause/Time key to set Date
Press or to adjust the Date
Press Redial/Pause/Time key to set the Hour
Press or to adjust the Hour
Press Redial/Pause /Time key to set the Minute
Press or to adjust the Minute (or press the Exit key to exit the
setting)
Press Redial/Pause /Time key for confirmation and exit

Setting area code

When sending local number, if the local switch still adds local area code
before local number, callback will not be processed. However, the "Local
Area Code Setting" function can filter the local area code from number
and only let incoming number display. For example, if the incoming call
display is "07552288788", after set "0755" as the local area code, the
display will be "2288788". If the incoming call display is "7552288788",
the local area code should be "755".
Press and hold the Mem/Prog key for 2 seconds
Press Channel/Query until "CodE" appears on the display
Enter four or three digits of area code. If wrong digits are entered, press
Flash/Clear key to modify.
Press Mem/Prog key for confirmation
Press Exit key to exit
7