Dhcp Status; Dhcp Server Status Detail - ZyXEL Communications XGS-4526 User Manual

Chapter 41 DHCP
• VLAN - The Switch is configured on a VLAN by VLAN basis. The Switch can be
configured as a DHCP server for one VLAN and at the same time the Switch can
be configured to relay DHCP requests for clients in another VLAN.

41.2 DHCP Status

Click IP Application > DHCP in the navigation panel. The DHCP Status screen
displays.
Figure 185 IP Application > DHCP Status
The following table describes the labels in this screen.
Table 130 IP Application > DHCP Status
LABEL
Server Status
Index
VID
Server Status
IP Pool Size
Relay Status
Relay Mode

41.3 DHCP Server Status Detail

Click IP Application > DHCP in the navigation panel and then click an existing
index number of a DHCP server configuration to view the screen as shown. Use
362
DESCRIPTION
This section displays configuration settings related to the Switch's DHCP
server mode.
This is the index number.
This field displays the VLAN ID for which the Switch is a DHCP server.
This field displays the starting DHCP client IP address.
This field displays the number of IP addresses that can be assigned to
clients.
This section displays configuration settings related to the Switch's DHCP
relay mode.
This field displays:
• None - if the Switch is not configured as a DHCP relay agent.
• Global - if the Switch is configured as a DHCP relay agent only.
• VLAN - followed by a VLAN ID if it is configured as a relay agent for
specific VLAN(s).
XGS-4526/4528F/4728F User's Guide