Port Vlan Trunking - ZyXEL Communications XGS-4526 User Manual

Table 15 IEEE 802.1Q VLAN Terminology (continued)
VLAN
PARAMETER
VLAN
Administrative
Control
VLAN Tag Control
VLAN Port

9.3 Port VLAN Trunking

Enable VLAN Trunking on a port to allow frames belonging to unknown VLAN
groups to pass through that port. This is useful if you want to set up VLAN groups
on end devices without having to configure the same VLAN groups on
intermediary devices.
The following figure describes VLAN Trunking. Suppose you want to create VLAN
groups 1 and 2 (V1 and V2) on devices A and B. Without VLAN Trunking, you
must configure VLAN groups 1 and 2 on all intermediary switches C, D and E;
otherwise they will drop frames with unknown VLAN group tags. However, with
VLAN Trunking enabled on a port(s) in each intermediary switch you only need
to create VLAN groups in the end devices (A and B). C, D and E automatically
XGS-4526/4528F/4728F User's Guide
TERM DESCRIPTION
Registration Fixed Fixed registration ports are permanent VLAN
members.
Registration Ports with registration forbidden are forbidden to
Forbidden join the specified VLAN.
Normal Ports dynamically join a VLAN using GVRP.
Registration
Tagged Ports belonging to the specified VLAN tag all
outgoing frames transmitted.
Untagged Ports belonging to the specified VLAN don't tag all
outgoing frames transmitted.
Port VID This is the VLAN ID assigned to untagged frames
that this port received.
Acceptable Frame You may choose to accept both tagged and
Type untagged incoming frames, just tagged incoming
frames or just untagged incoming frames on a
port.
Ingress filtering If set, the Switch discards incoming frames for
VLANs that do not have this port as a member.
Chapter 9 VLAN
119