Setting Operating Mode For Automatic Connection - Omron Promi-SD User Manual

11. From the 'Search Result' menu click the item with 'Promi-SD1' as its
DEVICE_NAME.
12. Once selected, its BD_ADDR will appear in the dialog box on the right side of
the 'Connect to...' button.
13. Click the 'Connect to...' button and the 'Successful Connection' Popup box will
appear as shown in Figure 5.
14. To release the first Bluetooth wireless connection between the SD units click
the 'Disconnect' button.
15. For automatic connection setup, set SD1 as Mode 2 and SD2 as Mode 1.
To utilize the SD automatic connection feature, make a Bluetooth connection
between two SD units. Once connected, one SD stores the 48-bit BD_ADDR
of its counterpart.
To expedite the 48-bit BD_ADDR input operation, SD is designed to store the
BD_ADDR of its latest counterpart.
2.1.2

Setting Operating Mode for Automatic Connection

New SD units are default set to 'MODE 0'. For SD automatic connection
change the operating mode of an SD to MODE 1 and another to MODE 2.
The following simple steps describe the SD operating mode change
procedure.
1. After making a Bluetooth wireless connection between two SD units, set the
operating mode of one SD to MODE 1, as shown in Figure 6.
Promi-SD™ User Manual ver 1.0
www.initium.co.kr
Figure 5.
Model: Promi-SD202-OA 18