Dmx Channel Values 4-Ch; Custom Static Color Mixing; Setting The Starting Address - Chauvet LED Par 64-36VWB User Manual

Custom Static Color Mixing

This fixture has the ability to accept custom static color settings. These are accessed via the control panel.
Please see the instructions below for further explanation.
1. Press <MENU> until
2. Press <ENTER>.
3. Using <UP> and <DOWN>, select the desired color value (
will remain off.
4. Press <ENTER> to continue to the next color (
5. Using <UP> and <DOWN>, select the desired color value (
will remain off.
6. Continue until the desired mix is obtained.
7. Press <ENTER> to save the final color setting. This will move the selection to the following color.
However, this is necessary to save the modification.
The colors are represented by the following in the menu map:
DMX Channel Values
4-CH
C
HANNEL
1
2
3
4
2-CH
C
HANNEL
1
2

Setting the Starting Address

This DMX mode enables the use of a universal DMX controller device. Each fixture requires a start address
from 1~512. A fixture requiring one or more channels for control begins to read the data on the channel
indicated by the start address. For example, a fixture that uses six DMX channels and was addressed to start
on DMX channel 100, would read data from channels: 100, 101, 102, 103, 104, and 105. Choose start
addresses so that the channels used do not overlap, and note the start address selected for future reference.
LED Par 64-36VW B&C User Manual
U--
appears on the LED screen.
r--- 000 100
= Warm White ( ~
C--- 000 100
= Cool White ( ~
V F
ALUE UNCTION
Master Dimmer
000 ó 255
Dimmer: 0%~100%
Warm White (2900K)
000 ó 255
Dimmer: 0%~100%
Cool White (6300K)
000 ó 255
Dimmer: 0%~100%
Strobe
000 ó 015
No function
016 ó 255
Strobe: 0%~100%
V F
ALUE UNCTION
Warm White (2900K)
000 ó 255
Dimmer: 0%~100%
Cool White (6300K)
000 ó 255
Dimmer: 0%~100%
11
000 100
~ ). By selecting
r, C
).
000 100
~ ). By selecting
)
)
000
, the color
000
, the color
Rev. 4