Operation; Control Panel Operation; Menu Map; Configuration (Dmx) - Chauvet Gobo Shot 50W IRC User Manual

4. O
PERATION
Control Panel
To access the control panel functions, use the four buttons located underneath the
display.

Operation

Menu Map

Configuration
(DMX)

Starting Address

Page 10 of 18
Button
<MENU> Selects an operation mode or backs out of the current menu option
<UP> Scrolls up the list of options or selects a higher value
<DOWN> Scrolls down the list of options or selects a lower value
<ENTER> Activates a menu option or a selected value
Main Function Programming Levels
DMX Address
Manual Mode nAn
Display diS
Reset
Load
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product's channels.
The Gobo Shot™ 50W IRC uses up to 4 DMX channels in its 4-channel DMX mode,
which defines the highest configurable address to 509.
If unfamiliar with DMX, download the DMX Primer from www.chauvetlighting.com.
To select the starting address, do the following:
1. Press <MENU> repeatedly until d001—d512 shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.
Function
d001—d512 Selects the DMX starting address
StoP Gobo rotation, stop
Gobo CU Gobo rotation, rainbow effect
CCU Gobo rotation, reverse rainbow effect
GoSP 000—255 Gobo rotation speed
diNN L000—L255 Dimmer (0—100%)
SHut S000—S100 Shutter (0—20 Hz)
diS Normal display
rdiS Reverse display
rESt Resets fixture
LoAd Loads factory defaults
Description
Gobo Shot™ 50W IRC User Manual