Warning! Verify that the power select switch on your unit matches the line voltage applied. All fixtures must be connected to circuits with a suitable Earth Ground. LG-3355 User Manual Linking cable Warranty Card User Manual Figure 1 - AC Voltage Switch Not all fixtures have a voltage select switch.
Caution! There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact CHAUVET. LG-3355 User Manual usage and maintenance? Introduction 11/14/2007/18:12...
NTRODUCTION Your LG-3355 is very unique! You may notice that the beams coming out of the projector are larger than the 4.95mW projectors. There is a very distinct reason for this. Unlike 4.95mW projectors the output of the CHAUVET laser projectors with Fatbeam™ technology inside outputs <20mW for each beam.
Set the Master/Slave switch on the first unit in the daisy chain to Master and turn this projector ON before all other projectors. Important: Turn Master unit On First otherwise link will not be consistent. On all remaining units set the Master/Slave switch to Slave then turn those projectors on. LG-3355 User Manual Voltage select Sound Back...
Pattern: Press Pattern button, Select any one of 9 patterns. Pattern will remain active until another number is pressed. List of available patterns to the Remote Tunnel Tunnel (slow) Square tunnel Liquid Sky Liquid Sky (oscillating effect) Wave Star Zig Zag Zig Zag (fast) LG-3355 User Manual 11/14/2007/18:12...
OMPLIANCE TATEMENT Your LG-3355 complies with FDA/CDRH 21CFR1040 and Laser Notice 50 as well as IEC 60825- 1:2003. Due to a unique optic design, this product does not exceed output powers that exceed its classification and output levels government agencies have determined to be appropriate for the products function.
This unit has been designed to be hung. It is recommended that, for safety purposes, your lighting effect are properly mounted using a suitable hanging clamp and safety cable. CHAUVET offers a range of items, which are ideal for safe mounting.
Package must be clearly labeled with a Return Merchandise Authorization Number (RA #). Products returned without an RA # will be refused. Call CHAUVET and request RA # prior to shipping the fixture. Be prepared to provide the model number, serial number and a brief description of the cause for the return.