Table of Contents
Advertisement
Menu operations
Using a Bluetooth device to pair
If you cannot open the connection between
your Bluetooth device and this unit from your
Bluetooth device, you can use this function to
establish a connection.
1
Display the Bluetooth Connection
Menu.
Refer to Introduction of Bluetooth telephone op-
erations on page 28.
2
Touch Special Device to select the spe-
cial device.
# Bluetooth devices that are difficult to establish
a connection with are called special devices. If
your Bluetooth device is listed as a special device,
select the appropriate one.
3
Touch the special device list to open the
connection.
This unit is now on standby for a connection
with the Bluetooth device.
# If three devices are already paired,
Memory Full is displayed and pairing cannot be
performed. In such cases, delete a paired device
first. Refer to the previous page.
4
Use your Bluetooth device to establish
a connection.
The connection method is different depending
on the Bluetooth device. Refer to the manual
for your Bluetooth device to establish a con-
nection.
While connecting, Pair your phone is dis-
played. If the connection is established,
Paired is displayed.
# If the connection fails, Error is displayed. In
such cases, try again from the beginning.
# You may also need to enter a PIN code into
this unit. If your telephone requires a PIN code to
establish a connection, look for the code on the
telephone or in its accompanying documenta-
tion.
# The PIN code is set to 0000 as the default, but
can be changed. Refer to Entering PIN code for
Bluetooth wireless connection on the next page.
Connecting to a Bluetooth
device automatically
If this function is set to on, a connection be-
tween your Bluetooth device and this unit will
take place automatically as soon as the two
devices are less than a few meters apart.
Initially, this function is set to on.
1
Display the Bluetooth Connection
Menu.
Refer to Introduction of Bluetooth telephone op-
erations on page 28.
2
Touch Auto Connect to turn automatic
connection on.
If your Bluetooth device is ready for a
Bluetooth wireless connection, a connection
to this unit will automatically be established.
# To turn automatic connection off, touch
Auto Connect again.
If connection fails, "Auto connection failed.
Retry?" appears. Touch Yes to reconnect.
3
Once you turn your vehicle's ACC
switch on again, a connection is estab-
lished automatically.
Switching visible unit
This function sets whether or not to make this
unit visible to the other device.
Initially, this function is set to on.
1
Display the Bluetooth Connection
Menu.
Refer to Introduction of Bluetooth telephone op-
erations on page 28.
2
Touch Visibility to select visibility off.
# To turn visibility on, touch Visibility again.
Displaying Bluetooth Device
address
This unit displays its Bluetooth device ad-
dress.
Section
13
61
En
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Table of Contents
