Setting The Bluetooth Safe Mode; Updating Bluetooth Connection Software; Setting The Rear View Camera; Displaying The Bluetooth System Version - Pioneer AVH-8400BT Operation Manual

Menu operations
2 Press HOME to switch to the HOME dis-
play.
3 Touch System key.
System menu is displayed.
4 Touch Bluetooth Memory Clear on the
system menu.
5 Touch Clear.
After selecting a desired item, a confirmation
display appears. Touch OK to delete the mem-
ory.
# If you do not want to clear the memory, touch
Cancel.
Updating Bluetooth connection
software
This function is used to update this unit with
the latest bluetooth software. For about blue-
tooth software and updating, refer to our web-
site.
Important
Never turn the unit off and never disconnect the
phone while the software is being updated.
1 Turn the unit off.
Refer to Basic operations on page 9.
2 Press HOME to switch to the HOME dis-
play.
3 Touch System key.
System menu is displayed.
4 Touch BT Software Update.
5 Touch Start to display the data transfer
mode.
# Follow the on-screen instructions to finish up-
dating the bluetooth software.
Displaying the Bluetooth
system version
If this unit fails to operate properly, you may
need to consult your dealer for repair. In such
cases, you may be asked to specify the system
version. Perform the following procedure to
check the version on this unit.
1 Turn the unit off.
Refer to Basic operations on page 9.
2 Press HOME to switch to the HOME dis-
play.
3 Touch System key.
System menu is displayed.
4 Touch Bluetooth Version Information to
display to the version of the Bluetooth
module of this unit.

Setting the Bluetooth safe mode

This setting restricts your operation for
Bluetooth device while driving.
If this mode is set to on, the following opera-
tions are not possible.
! Calling using entering phone number
mode
! All operations in the Bluetooth connection
menu
CAUTION
For your safety, safe mode must always be set
"On" while driving.
1 Display the system menu.
Refer to Introduction of menu operations on
page 44.
2 Touch Safe Mode on the system menu
to turn Bluetooth safe mode on or off.

Setting the rear view camera

(back up camera)
CAUTION
Pioneer recommends the use of a camera
which outputs mirror-reversed images.
Otherwise, the screen image will appear re-
versed.
This unit features a function that automatically
switches to the rear view camera video (R.C
IN) when a rear view camera is installed on
your car and the shift lever is moved to the RE-
VERSE (R) position. (For more details, con-
sult your dealer.)
Section
13
55
En