Initializing All Remote Control Codes - Yamaha RX-V471 Owner's Manual

■
SOURCE
CODE SET
CODE SET
When the remote control codes for external devices are assigned to
SOURCE RECE VER
SOURCE/
an input selection key, the external device can be controlled with
RECEIVER
1 2 3 4
the following keys after selecting the appropriate input source or
Input selection keys
[ A ] V AUX
SCENE.
HDMI 1-4
AV
1 2 3 4
V-AUX
AV 1-6
5 6 AUDIO DOCK
AUDIO
• Use SOURCE/RECEIVER to switch the device to be controlled with menu
TUNER
USB
DOCK
operation keys and numeric keys between the unit and external devices. The unit
TUNER
FM FM AM AM
PRESET PRESET TUNING TUNING
USB can be controlled when SOURCE/RECEIVER glows orange. External devices can
NFO NFO MEMORY MEMORY
[A]
be controlled when the key glows green.
SUR DECODE SUR DECODE STRAIGHT STRAIGHT
MOVIE MOVIE MUSIC MUSIC
ENHANCER ENHANCER
SLEEP SLEEP D RECT D RECT
SOURCE
SCENE
BD SCENE
TV CD RAD O
DVD
SETUP SETUP OPTION OPTION
Menu operation
keys
Menu operation keys
ENTER
RETURN DISPLAY
TOP POP UP
MUTE MUTE
MENU MENU
MODE MODE
External device
operation keys
1 2 3 4
Numeric keys
5 6 7 8
9 0 10 10 ENT ENT
External device
TV
operation keys
INPUT
TV operation keys
TV VOL TV CH
MUTE
INPUT
MUTE
TV VOL
TV CH
TV
Numeric keys
TV operation keys
• The keys above are only available when there are the corresponding keys on the
remote control of external devices.
Operating external devices
Turns on and off external
devices.
Cursor Selects an item.
ENTER Confirms a selected item.
RETURN Returns to the previous screen.
DISPLAY Switch the content of display.
TOP MENU Displays the top menu.
POP-UP MENU Displays a pop-up menu.
Stops playback.
Stops playback temporarily.
Starts playback of the currently
selected song (or video).
Searches backwards/forwards
while pressing them.
Skips to the beginning of the
currently playing song (or
video)/the next song (or video).
Enter numbers.
Operate a TV.

Initializing all remote control codes

Initializing all remote control codes to the initial factory settings.
1
Press CODE SET using a pointed object such as the
tip of a ballpoint pen.
SOURCE/RECEIVER blinks twice.
Perform each of the following steps within 1 minute. Settings
will be automatically stopped if more than 1 minute passes
after the last operation. To reset, repeat from step 1.
2
Press SOURCE/RECEIVER.
3
Enter "9981" using the numeric keys.
Once the remote control code is reset successfully SOURCE/
RECEIVER will blink twice. If the reset fails, SOURCE/
RECEIVER blinks six times. If setup fails, repeat from step 1.
76
En