Table of Contents
Advertisement
INSTALLING
Continued
103415
Mantel Clearances for Built-In Installation
If placing mantel above built-in fireplace, you must meet minimum clearance between mantel
shelf and top of fireplace opening.
Figure 16 - Minimum Mantel Clearances for Built-In Installation
If your installation does not meet the above minimum clearances, you must:
• raise the mantel to an acceptable height, OR
• remove the mantel.
INSTALLING GAS PIPING TO FIREPLACE LOCATION
A qualified service person must connect fireplace to gas supply. Follow all local
codes.
Never connect heater directly to the propane supply. This heater requires an
external regulator (not supplied). Install the external regulator between the heater
and propane supply.
Installation Items Needed
Before installing fireplace, make sure you have the items listed below.
• piping (check local codes)
• sealant (resistant to LP/propane gas)
• manual shutoff valve *
• test gauge connection *
• sediment trap
* An A.G.A. design-certified manual shutoff valve with 1/8" NPT tap is an acceptable
alternative to test gauge connection. Purchase the optional A.G.A. design-certified manual
shutoff valve from your dealer. See Accessories, page 34.
Mantel Shelf
10"
8"
6"
1
2
"
/2
1 /2
20"
24
"
Distances to
Underside of
Mantel
NOTICE
CAUTION
WARNING ICON
G 001
• tee joint
• pipe wrench
• approved flexible gas line with gas
connector (if allowed by local
codes) (not provided )
Underside of
Mantel Shelf
All minimum
distances are
in inches
1 /2
27
"
30"
Top of
Fireplace
Opening
Continued
15
Hide quick links:
Advertisement
Table of Contents
