Replacing A Front Turn Signal Light Bulb Or An Auxiliary Light Bulb - Yamaha MAJESTY 400 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
Replacing a front turn signal
light bulb or an auxiliary light
bulb
1
1. Place the scooter on the center-
stand.
2 2. Remove panel A. (See page 6-6.)
3. Remove the windshield by remov-
ing the screws.
3
4
1
(×6)
5
6
7
1. Screw
2. Windshield
8
4. Remove the front turn signal light
and auxiliary light unit by removing
9
the screws.
EAU34250
1
1. Screw
2
2. Front turn signal light and auxiliary light
unit
5. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
1
2
1. Turn signal light bulb socket
2. Auxiliary light bulb socket
6-34
6. To remove the defective turn sig-
nal light bulb, push it in and turn it
counterclockwise. To remove the
defective auxiliary light bulb, pull it
out.
7. To insert a new turn signal light
bulb into the socket, push it in, and
2
then turn it clockwise until it stops.
To install a new auxiliary light bulb,
push it into the socket.
8. Install the socket (together with the
bulb) by turning it clockwise.
9. Place the turn signal light and aux-
iliary light unit in the original posi-
tion, and then install the screws.
10. Install the windshield by installing
the screws.