Replacing A Front Turn Signal Light Bulb - Yamaha MAJESTY YP250A Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
7. Install the panel.
8. Have a Yamaha dealer adjust
the headlight beam if necessary.
6
Replacing a front turn signal
light bulb
Tur n si g nal l i g ht bul b ( f r o nt ) , r e pl a ci n g
1. Place the scooter on the center-
stand.
2. Remove panel A. (See page
6-11 for panel removal and
installation procedures.)
6-39
EAU03111
1. Socket
3. Remove the socket (together
with the turn signal light bulb) by
turning it counterclockwise.
4. Remove the defective bulb by
pushing it in and turning it coun-
terclockwise.
5. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
6. Install the socket (together with
the bulb) by turning it clockwise.
7. Install the panel.
1