Indicator And Warning Lights - Yamaha MAJESTY YP250A Owner's Manual

.
(Parking)
The steering is locked, and the tail-
light, license light and auxiliary light
are on, but all other electrical sys-
tems are off. The key can be
removed.
To turn the main switch to "
1. Turn the key to "LOCK".
2. Slightly turn the key counter-
clockwise until it stops.
3. While still turning the key coun-
terclockwise, push it in until it
snaps into place.
cC
Do not use the parking position for
an extended length of time, other-
wise the battery may discharge.
INSTRUMENT AND CONTROL FUNCTIONS
EAU03733
1 2
.
":
1. Left turn signal indicator light "4"
2. ABS warning light "
3. High beam indicator light "&"
4. Oil change indicator light "
5. Right turn signal indicator light "6"

Indicator and warning lights

I n di c at o r and war n i n g l i g ht s
ECA00043
Turn signal indicator lights "4"
and "6"
Tur n si g nal i n di c at o r l i g ht s
The corresponding indicator light
flashes when the turn signal switch is
pushed to the left or right.
3 4 5
"
"
7
EAU03034
EAU04121
3-2
ABS warning light "
ABS war n i n g l i g ht
cC
If the ABS warning light comes on
or flashes while riding, the ABS
may be defective. If this occurs,
have a Yamaha dealer check the
electrical circuit.
See page 3-13 for an explanation of
the ABS.
The electrical circuit of the warning
light can be checked by setting the
engine stop switch to "#" and turning
the key to "ON".
The warning light should come on for
a few seconds, and then go off. If the
warning light does not come on or
remains on, have a Yamaha dealer
check the electrical circuit.
EAU04901
"
ECA00019
3